2024-03-28T19:56:53Zhttps://eprints.lib.hokudai.ac.jp/dspace-oai/requestoai:eprints.lib.hokudai.ac.jp:2115/746492022-11-17T02:08:08Zhdl_2115_20045hdl_2115_139Bonding Strengths of Interfaces between Cast Mg-Al Alloy and Cast-In Inserted Transition Metal CoresOhmi, TatsuyaIguchi, ManabuBonding StrengthCast-in InserionMagnesium-Alminum AlloyTransition MetalPush-out Test560The structures and strengths of the joining interfaces between Mg-10mass%Al alloy and cast-in inserted transition metal cores have been investigated. Three kinds of core materials were examined: S20C carbon steel, SUS304 stainless steel and titanium. The Mg-Al alloy specimen had higher shear strength than the pure Mg specimen for every core material. Molten Mg does not react with these core materials. On the other hand, molten Mg-Al alloy reacts with each core material and produces metallurgical joint with the core. The Ti core provided highest shear strength.日本実験力学会Journal Articleapplication/pdfhttp://hdl.handle.net/2115/74649https://eprints.lib.hokudai.ac.jp/dspace/bitstream/2115/74649/1/J.JSEM%2013.%20s189.pdf1346-49301346-4930AA11822914実験力学13Special Issues189s1932013-07-15enginfo:doi/10.11395/jjsem.13.s189著作権は日本実験力学会にある。利用は著作権の範囲内に限られる。publisher