Type | Author(s) | Title | Other Titles | Citation | Citation(alt) | Issue Date |
article | 大参, 達也; 高橋, 和久; 工藤, 昌行 | Al-Cr系複合鋳込み遠心鋳造材のレーザ表面改質処理 | Laser Surface Modification of Al-Cr Alloy Castings Produced by Centrifugal Duplex Casting | 日本金属学会誌 | Journal of the Japan Institute of Metals | 1-Nov-2001 |
article | 松浦, 清隆; 大参, 達也; 伊藤, 洋一; 工藤, 昌行; 田中, 大史 | Al-Cu二元系の純金属混合圧粉体の固相焼結中の組織と強度の変化 | Changes in microstructure and mechanical properties during solid sintering of Al-Cu binary mixed powder compact | 軽金属 | Journal of Japan Institute of Light Metals | 30-Mar-1995 |
bulletin (article) | 大宮, 光裕; 大笹, 憲一; 大参, 達也; 工藤, 昌行 | Al-Ge-Si三元系平衝状態図の計算 | Calculation of Equilibrium Phase Diagram of Al-Ge-Si Ternary System | 北海道大學工學部研究報告 | Bulletin of the Faculty of Engineering, Hokkaido University | 20-Jul-1991 |
article | 大参, 達也; 上田, 誠; 工藤, 昌行; 井口, 学 | Al-Ni-Si系複層遠心鋳造管の複合硬化層形成と耐摩耗性 | Formation and wear resistance of composite - hardened layer in centrifugally cast Al-Ni-Si duplex pipes | 鋳造工学 | Journal of Japan Foundry Engineering Society | 25-Apr-2005 |
bulletin (article) | 工藤, 昌行; 高橋, 忠義 | Al-Si合金の固-液共存層における液相の流動性の定量的評価 | Estimation of the Fluidity of the Liquid in the Solid-Liquid Coexisting Zone of an Al-Si Alloy | 北海道大學工學部研究報告 | Bulletin of the Faculty of Engineering, Hokkaido University | 20-Sep-1982 |
bulletin (article) | 工藤, 昌行; 高橋, 忠義 | Al-Si合金の等軸晶層の形成とその層内の液相流動性 | Formation of Equiaxed Zone and Fluidity of Liquid in the Zone for Al-Si Alloy | 北海道大學工學部研究報告 | Bulletin of the Faculty of Engineering, Hokkaido University | 31-Jul-1987 |
bulletin (article) | 大笹, 憲一; 大宮, 光裕; 工藤, 昌行; 大参, 達也 | Al基三元合金の凝固パスの解析 | Analysis of Solidification Path of Aluminum Base Ternary Alloy | 北海道大學工學部研究報告 | Bulletin of the Faculty of Engineering, Hokkaido University | 29-Jan-1993 |
article | 小原, 裕樹; 工藤, 昌行; 松浦, 清隆 | FeAl-TiB2系複合材の擬HIP燃焼合成 | Pseudo-HIP Combustion Synthesis of FeAl-TiB2 Composites | 鋳造工学 | - | 25-Nov-2006 |
article | 大参, 達也; 中寺, 一也; 工藤, 昌行 | NaおよびPの添加を併用した複合鋳込み法による過共晶Al-Si合金の改良処理 | Modification of hipereutectic Al-Si alloys by the Duplex Casting process with addition of Na and P | 軽金属 | Journal of Japan Institute of Light Metals | 30-Mar-1992 |
article | 大参, 達也; 矢野間, 潤持; 工藤, 昌行 | Ni-Al系金属間化合物のテルミット型燃焼合成における反応生成物の溶融挙動 | Melting Behavior of Reaction Products during Thermite-Type Combustion Synthesis of Ni-Al Intermetallic Compounds | 日本金属学会誌 | Journal of the Japan Institute of Metals | 1-Mar-2001 |
article | 松浦, 清隆; 小柳, 貴幸; 大参, 達也; 工藤, 昌行 | アーク表面合金化によるニオブのアルミナイド被覆 | Aluminide Coating on Niobium by Arc Surface Alloying | 日本金属学会誌 | Journal of the Japan Institute of Metals | Sep-2004 |
article | 松浦, 清隆; 小柳, 貴幸; 工藤, 昌行; 呉, 長桓; 桐原, 聡秀; 宮本, 欽生 | アルミナイド系金属間化合物の反応性被覆 | Reactive Coating of Aluminide Intermetallic Compounds | 鋳造工学 | - | 25-Feb-2003 |
article | 大参, 達也; 簔口, 光樹; 工藤, 昌行; 伊藤, 洋一; 松浦, 清隆 | スラリー・溶湯混合法による半凝固過共晶Al-Si合金の見掛けの粘性挙動 | Change in apparent viscosity of stirred slurry during production of semi-solid hypereutectic Al-Si alloy by slurry-melt mixing process | 軽金属 | Journal of Japan Institute of Light Metals | 30-Sep-1994 |
article | 大参, 達也; 簑口, 光樹; 工藤, 昌行; 伊藤, 洋一; 松浦, 清隆 | スラリー・溶湯混合法による半凝固過共晶Al-Si合金の初晶Si粒径の制御 | Control of Primary Silicon Crystal Size of Semi-Solid Hypereutectic Al-Si Alloy by Slurry-Melt Mixing Process | 日本金属学会誌 | Journal of the Japan Institute of Metals | Nov-1994 |
article | 大参, 達也; 室田, 康宏; 桐原, 和彦; 工藤, 昌行 | テルミット型燃焼合成法を利用したNi-Al系金属間化合物の遠心鋳造 | Centrifugal Casting of Ni-Al Intermetallic Compounds Produced by Thermite-Type Combustion Synthesis | 日本金属学会誌 | Journal of the Japan Institute of Metals | May-2001 |
article | 大参, 達也; 簑口, 光樹; 工藤, 昌行; 伊藤, 洋一; 松浦, 清隆; 石井, 邦宜 | 亜共晶Al-Si合金の半凝固スラリーとリンを添加した過共晶Al-Si合金溶湯との混合による微細初晶シリコンの生成 | Formation of Fine Primary Silicon Crystals by Mixing of Semi-solid Slurry of Hypoeutectic Al-Si Alloy and Phosphorus-Added Hypereutectic Al-Si Alloy Melt | 日本金属学会誌 | Journal of the Japan Institute of Metals | Mar-1994 |
article | 小柳, 貴幸; 松浦, 清隆; 工藤, 昌行; 呉, 長桓; 桐原, 聡秀; 宮本, 欽生 | 液滴/粉末間の燃焼合成反応を利用した NiAlの溶接 | Welding of NiAl by Self-Propagating High-Temperature Synthesis Reaction between Droplet and Powder | 鋳造工学 | - | 25-Dec-2003 |
bulletin (article) | 大笹, 憲一; 高橋, 忠義; 工藤, 昌行 | 円形空孔浸出法による実用鋼の固相率の決定 | Estimation of Fraction Solid for Commercial Carbon Steel by the Seepage Method | 北海道大學工學部研究報告 | Bulletin of the Faculty of Engineering, Hokkaido University | 16-Oct-1991 |
article | 大参, 達也; 室田, 康宏; 工藤, 昌行 | 遠心燃焼合成法により作製したNiAl鋳造材中の気孔欠陥 | Porosity in the NiAl Castings Produced by Centrifugal Combustion Synthesis | 日本金属学会誌 | Journal of the Japan Institute of Metals | 1-Aug-2001 |
article | 大参, 達也; 桐原, 和彦; 工藤, 昌行 | 遠心燃焼合成法によるNi-Al合金の精密鋳造と異種金属材料への同時接合 | Precision Casting of Ni-Al Alloy and Simultaneous Joining to Dissimilar Metals by Centrifugal Combustion Synthesis | 日本金属学会誌 | Journal of the Japan Institute of Metals | Sep-2000 |