open access

https://hdl.handle.net/2115/16894

Effect of cathode separator structure on performance characteristics of free-breathing PEMFCs

英語

Power

2006-11-08

Elsevier B.V.

Journal of Power Sources

162(1)

58-65

The performance of free-breathing polymer electrolyte membrane fuel cells (PEMFCs) was studied experimentally and the effect of the cathode separator structure on the cell performance was investigated. Two types of cathode separators were used for a cell with an 18 cm2 active area: an open type with parallel rectangular open-slits and a channel type with straight vertical channels with open ends. The polarization curves, cell impedance, and contact pressure distribution of the separators were measured with each type of cathode structure. The result showed that it is difficult to realize a uniform contact pressure across the cell layers for the open type separator, and this results in higher contact resistance and poorer cell performance than the channel type separator. The channel type separator can maintain a low contact resistance, and the cell performance is strongly affected by the natural convection inside the channel. Optimization of the channel design of the channel type separator achieves good performance and this type of separator is superior for a free-breathing PEMFC. A computational three-dimensional analysis for the free-breathing channel type PEMFC with the different channel depths was performed, and it identified the influence of natural convection.

学術雑誌論文

Accepted Manuscript

0378-7753

0378-7753