open access

https://hdl.handle.net/2115/44848

Analysis of natural rock slope deformations under temperature variation : A case from a cool temperate region in Japan

英語

Finite element (FE)

2011-03

Elsevier

Cold Regions Science and Technology

65(3)

488-500

In this paper, natural rock slope deformation across fractures predominantly in a chert rock mass was monitored using six surface fracture displacement sensors, and the deformations arising from thermal stresses were predicted using (5 m × 5 m) two-dimensional (2D) finite element (FE) plane strain analysis coupled with a model for rock mass expansion due to freezing of pore water. A new and simple method to minimize displacement proportional to temperature (due to thermal response of chert rock mass and sensor) was proposed. By applying the method, the corrected displacement, u′, can be well recognized. Under u′, clear rock mass movement, which could be related to fracture growth, was observed. In addition, progressive fracture opening and closure were noted. Results from this study indicate insignificant influences of weather conditions on fracture/rock mass movement. Furthermore, under numerical analysis (FE), in the rock mass model (with 1 m deep fracture), tensile stresses that were large enough to induce fracture growth appeared at the fracture tip when temperature lowered. And in the rock slope model (with 1 m deep fracture), small tensile stresses, which were sufficient to cause fracture growth along the planes of weakness were observed. This research suggests that freezing effects on deformation of chert rock mass are insignificant, and we tentatively suggest that thermal fatigue predominantly caused the permanent fracture deformations.

学術雑誌論文

Accepted Manuscript

0165-232X

AA00143535