open access

https://hdl.handle.net/2115/57969

Effect of (Ti:B) atomic ratio on mechanical properties of TiB2–Fe composites “in situ” fabricated via Self-propagating High-temperature Synthesis

英語

compressive strength

2015-03-15

Elsevier

Materials & Design

69

1-11

The TiB2-based Fe–matrix cermets with titanium addition (literarily different Ti:B ratio) were fabricated from elemental powders ‘‘in situ’’ using the Self-propagating High-temperature Synthesis method (SHS) under high pressure. The effect of Ti:B ratio on microstructure and phase composition with particular focus on matrix phase were analyzed using X-ray diffraction (XRD) and Wavelength Dispersive Spectroscopy (WDS) for composites with intended 25 vol.% and 35 vol.% of Fe. Moreover, for composites with 35 vol.% of Fe bending strength and compressive strength were investigated. The compressive strength reached maximum value in material with Ti:B atomic ratio of 0.49, which possessed the highest TiB2 content and matrix phase consisting of Fe and Fe2B. However, modulus of rupture (MOR) test indicated that composite with titanium excess (Ti:B atomic ratio of 0.525) was characterized by the highest bending strength, due to successful elimination of Fe2B intermetallics.

学術雑誌論文

Submitted Manuscript Under Review

0261-3069