Control method for a combined active filter system employing a current source converter and a high pass filter

Fukuda, S.; Endoh, T.

IEEE Transactions on Industry Applications, 1995, 31(3), 590-597

Permalink : https://hdl.handle.net/2115/5966

このアイテムのアクセス数:1,160件（2026-04-15 23:30 集計）

閲覧可能ファイル 

ファイル フォーマット サイズ 閲覧回数 説明
ITIA31_3 pdf 3.24 MB 2,556

論文情報

ファイル出力 EndNote Basic出力 Mendeley出力

アクセス権
open access
URI
https://hdl.handle.net/2115/5966
タイトル
Control method for a combined active filter system employing a current source converter and a high pass filter
著者
著者名
Fukuda, S.
福田, 昭治
著者名
Endoh, T.
言語
英語
発行日
1995-05
出版者
IEEE
収録物名
IEEE Transactions on Industry Applications
巻(号)
31(3)
ページ
590-597
抄録
This paper describes a control method with a combined filter system which senses load current, source current, and line voltage to create reference signals for an active filter. The transfer function of the active filter is identified and is used for the control system design. It is shown that the source current feedback is most effective in suppressing the harmonic-enlarging effects due to parallel resonance and the harmonic current generated by source harmonic voltages. A small setup controlled by a DSP was built, and the validity of the proposed method was demonstrated by experimental results
資源タイプ
学術雑誌論文
出版タイプ
Version of Record
権利情報
©1995 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. IEEE, IEEE Transactions on Industry Applications , 31(3), 1995, p590-597
PISSN
0093-9994
関連情報 (isIdenticalTo)
出版社版DOI
https://doi.org/10.1109/28.382120