open access

https://hdl.handle.net/2115/75836

Characteristics of wood pellets mixed with torrefied rice straw as a biomass fuel

英語

Clinker production

2019-09

Springer

International journal of energy and environmental engineering

10(3)

357-365

Utilization of rice straw as an alternative fuel source to fossil fuel has been considered. However, properties such as water content, low heating value, less grindability, high bulk density, and high ash content are problems in such a biomass fuel supply chain. This study attempted to produce wood pellets mixed with torrefied rice straw (WPTRS) to solve the problems related to using rice straw as fuel. For that, preferred torrefaction conditions, such as torrefaction temperature and holding time, were determined by indicators of the grindability, energy loss, and heating value. As a result, the preferred grindability was found at torrefaction temperatures of over 220 degrees C. In terms of energy, we derived two viewpoints: i.e., if minimum energy loss is prioritized, the preferred torrefaction temperature is 220 degrees C, and for an increase in the heating value of rice straw, 280 degrees C was preferred. Next, WPTRS was produced using rice straw torrefied at 220 degrees C and 280 degrees C, and by changing the mixing ratio of rice straw to wood. Burning tests were conducted to clarify the WPTRS characteristics and the results revealed that the torrefaction at a temperature of 280 degrees C increased WPTRS's heating value. In addition, the basicity can be used as a good indicator for clinker production when wood and rice straw are used as fuel.

学術雑誌論文

Version of Record

Creative Commons Attribution 4.0 International

2008-9163