open access

https://hdl.handle.net/2115/81540

Sudden Discharging and Overcurrent Simulations of REBCO Coils Coated With Conductive Epoxy Resin

英語

quench protection

2021-08

IEEE (Institute of Electrical and Electronics Engineers)

IEEE transactions on applied superconductivity

31(5)

4600705

In 2011, a no-insulation (NI) winding technique was first proposed. Rare-Earth Barium Copper Oxide (REBCO) pancake coils using the NI winding technique are promising to generate an ultrahigh magnetic field, because the NI winding technique drastically enhances the thermal stability. When a local hot spot appears on a turn of the NI REBCO pancake coil, the enforced current can bypass into the adjacent turns to suppress the Joule heat generation. Recently, different types of REBCO coils to enhance the thermal stability by escaping the current flow from a local hot spot have been researched and developed. A few years ago, a REBCO single pancake coil whose upper surface was coated with conductive epoxy resin was proposed as one kind of NI winding techniques. The high thermal stability of conductive-epoxy-resin-coated (CERC) REBCO single pancake coil was demonstrated through an overcurrent test. However, the current behavior in the coil is still unclear. Therefore, we have newly developed an equivalent circuit model for CERC REBCO pancake coils. The sudden discharging and overcurrent tests were simulated for CERC REBCO pancake coils, and the resistance parameters were varied to investigate the coil stability.

学術雑誌論文

Accepted Manuscript

© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.

1051-8223