open access

https://hdl.handle.net/2115/83731

Ammonium thiosulfate extraction of gold from printed circuit boards (PCBs) of end-of-life mobile phones and its recovery from pregnant leach solution by cementation

英語

Recycling

2020-01

Elsevier

Hydrometallurgy

191

105214

In this study, the ammonium thiosulfate leaching of gold (Au) from printed circuit boards (PCBs) of end-of-life mobile phones and the subsequent recovery of dissolved metals from pregnant leach solution via cementation were elucidated under various conditions. Over 99% of Au was extracted from crushed PCBs (D-50 = 85 mu m) under the following conditions: 1 M of Na2S2O3, 10 mM of CuSO4, 1 M of ammonia/ammonium concentration, 0.1 g/10 ml of solid-to-liquid ratio, and a 24-h of leaching time in the presence of oxygen. In contrast, the recovery of Au ions via cementation was more favorable in the absence of oxygen. Among the various cementation agents evaluated, copper (Cu) was the most selective and recovered around 95% of extracted Au from the pregnant leach solution even in the presence of various coexisting metal ions. The cementation of Au exhibited two distinct kinetic regions: (1) an initially rapid rate, and (2) a more gradual and constant rate. Finally, the use of Cu plates to recover Au ions from ammonium thiosulfate pregnant solution of crushed PCBs is proposed, which could selectively recover about 80% of dissolved Au and is easier to handle and reuse compared with Cu powder.

学術雑誌論文

Accepted Manuscript

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International

© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/

0304-386X