open access

https://hdl.handle.net/2115/87110

Single-phase La(0.8)Sr(0.2)Co(1-x)Mn(x)O(3-delta )electrocatalyst as a triple H+/O2-/e(-) conductor enabling high-performance intermediate-temperature water electrolysis

英語

Fuel cell

2022-09

Elsevier

Journal of Materiomics

8(5)

1020-1030

Hydrogen, especially the green hydrogen based on water electrolysis, is of great importance to build a sustainable society due to its high-energy-density, zero-carbon-emission features, and wide-range applications. Today's water electrolysis is usually carried out in either low-temperature (<100 degrees C), e.g., alkaline electrolyzer, or high-temperature (>700 degrees C) applications, e.g., solid oxide electrolyzer. However, the low-temperature devices usually suffer from high applied voltages (usually >1.5 V @0.01 A cm(-2)) and high cost; meanwhile, the high-temperature ones have an unsatisfied lifetime partially due to the incompatibility among components. Reasonably, an intermediate-temperature device, namely, proton ceramic cell (PCC), has been recently proposed. The widely-used air electrode for PCC is based on double O2-/e(-) conductor or composited O2-/e(-) -H+ conductor, limiting the accessible reaction region. Herein, we designed a single-phase La0.8Sr0.2Co1-xMnxO3-delta (LSCM) with triple H+/O2-/e(-) conductivity as the air electrode for PCCs. Specifically, the La0.8Sr0.2Co0.8Mn0.2O3-delta (LSCM8282) incorporates 5.8% proton carriers in molar fraction at 400 degrees C, indicating superior proton conducting ability. Impressively, a high current density of 1580 mA cm(-2) for hydrogen production (water electrolysis) is achieved at 1.3 V and 650 degrees C, surpassing most low- and high-temperature devices reported so far. Meanwhile, such a PCC can also be operated under a reversible fuel cell mode, with a peak power density of 521 mW cm(-2) at 650 degrees C. By correlating the electrochemical performances with the hydrated proton concentration of single-phase triple conducting air electrodes in this work and our previous work, a principle for rational design of high-performance PCCs is proposed. (C) 2022 The Chinese Ceramic Society. Production and hosting by Elsevier B.V.

学術雑誌論文

Version of Record

2352-8478