Recrystallization Texture of Cold-rolled Oxide Dispersion Strengthened Ferritic Steel

Leng, Bin; Ukai, Shigeharu; Sugino, Yoshito; Tang, Qingxin; Narita, Takeshi; Hayashi, Shigenari; Wan, Farong; Ohtsuka, Satoshi; Kaito, Takeji

Recrystallization Texture of Cold-rolled Oxide Dispersion Strengthened Ferritic Steel

Leng, Bin; Ukai, Shigeharu; Sugino, Yoshito et al.

ISIJ International, 2011, 51(6), 951-957

Permalink : https://hdl.handle.net/2115/76320

このアイテムのアクセス数:517件（2026-08-19 06:21 集計）

閲覧可能ファイル

ファイル	フォーマット	サイズ	閲覧回数	説明
ISIJ Int. 51(6)_ 951-957 (2011)	pdf	2.27 MB	484

論文情報

ファイル出力 EndNote Basic出力 Mendeley出力

アクセス権	open access
URI	https://hdl.handle.net/2115/76320
タイトル	Recrystallization Texture of Cold-rolled Oxide Dispersion Strengthened Ferritic Steel
著者	Leng, Bin ; Ukai, Shigeharu ; Sugino, Yoshito ; Tang, Qingxin ; Narita, Takeshi ; Hayashi, Shigenari ; Wan, Farong ; Ohtsuka, Satoshi ; Kaito, Takeji
著者名 Leng, Bin
e-Rad_Researcher 00421529 著者名 Ukai, Shigeharu
著者名 Sugino, Yoshito
著者名 Tang, Qingxin
著者名 Narita, Takeshi
e-Rad_Researcher 10321960 著者名 Hayashi, Shigenari
著者名 Wan, Farong
著者名 Ohtsuka, Satoshi
著者名 Kaito, Takeji
言語	英語
キーワード	ODS ferritic steel
	cold-rolling
	recrystallization
	texture
発行日	2011-06-15
出版者	Iron and Steel Institute of Japan
出版者	日本鉄鋼協会
収録物名	ISIJ International
巻(号)	51(6)
ページ	951-957
抄録	The recrystallization behavior of a 88% cold-rolled 15Cr–ODS ferritic steel was investigated. Specimens annealed at low and high temperatures show two different recrystallization modes. Annealing at 1000°C generates a structure consisting of coarse grains with {110}<112> texture, while annealing at 1150°C and 1300°C produce fine grains with {111}<112> texture. This phenomenon is ascribed to that the mobility of boundaries between {110}<112> nuclei and {001}<110> deformed matrix are higher than between {111}<112> nuclei and {001}<110> deformed matrix. Also it is found that a recovery annealing at 900°C prior to recrystallization annealing will retard recrystallization, which results in a structure of coarse grains with {110}<112> texture even after the following annealing at 1300°C.
資源タイプ	学術雑誌論文
出版タイプ	Version of Record
権利情報	著作権は日本鉄鋼協会にある
PISSN	0915-1559
EISSN	1347-5460
NCID	AA10680712
関連情報 (isIdenticalTo)	出版社版DOI https://doi.org/10.2355/isijinternational.51.951