open access

https://hdl.handle.net/2115/88088

Stray particles as the source of residuals in sand filtrate : Behavior of superfine powdered activated carbon particles in water treatment processes

英語

Turbidity

2021-02-15

Elsevier

Water Research

190

116786

Although superfine powdered activated carbon has excellent adsorption properties, it is not used in conventional water treatment processes comprising coagulation–flocculation, sedimentation, and sand filtration (CSF) due to concerns about its residual in treated water. Here, we examined the production and fate of very fine carbon particles with lacking in charge neutralization as a source of the residual in sand filtrate after CSF treatment. Almost all of the carbon particles in the water were charge-neutralized by coagulation treatment with rapid mixing, but a very small amount (≤0.4% of the initial concentration) of very fine carbon particles with a lesser degree of charge neutralization were left behind in coagulation process. Such carbon particles, defined as stray carbon particles, were hardly removed by subsequent flocculation and sedimentation processes, and some of them remained in the sand filtrate. The concentration of residual carbon particles in the sand filtrate varied similarly with that of the stray carbon particles. The stray and residual carbon particles were similarly smaller than the particles before coagulation treatment, but the residual carbon particles had less charge neutralization than the stray carbon particles. The turbidity of water samples collected after sedimentation was not correlated with the residual carbon concentration in the sand filtrate, even though it is often used as an indicator of treatment performance with respect to the removal of suspended matter. Based on these findings, we suggest that reduction of the amount of stray particles should be a performance goal of the CSF treatment. Examining this concept further, we confirmed that the residence time distributions in the coagulation and flocculation reactors influenced the concentration of stray carbon particles and then the residual carbon particle concentration in sand filtrate, but found that the effect was dependent on coagulant type. A multi-chambered-reactor configuration lowered both the stray carbon particle concentration after coagulation treatment and the residual carbon particle concentration in sand filtrate compared with a single-chambered reactor configuration. When a normal basicity PACl that consisted mainly of monomeric Al species was used, the stray carbon particle concentration was decreased during coagulation process and then gradually decreased during subsequent flocculation process because the monomeric Al species were transformed to colloidal Al species via polymeric Al species. In contrast, when a high-basicity PACl that consisted mostly of colloidal Al species was used, coagulation treatment largely decreased the stray carbon particle concentration, which did not decrease further during subsequent flocculation process. These findings will be valuable for controlling residual carbon particles after the CSF treatment.

学術雑誌論文

Accepted Manuscript

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International

© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/

0043-1354

AA00886427