Type | Author(s) | Title | Other Titles | Citation | Citation(alt) | Issue Date |
article | 大参, 達也; 高橋, 和久; 工藤, 昌行 | Al-Cr系複合鋳込み遠心鋳造材のレーザ表面改質処理 | Laser Surface Modification of Al-Cr Alloy Castings Produced by Centrifugal Duplex Casting | 日本金属学会誌 | Journal of the Japan Institute of Metals | 1-Nov-2001 |
article | 松浦, 清隆; 大参, 達也; 伊藤, 洋一; 工藤, 昌行; 田中, 大史 | Al-Cu二元系の純金属混合圧粉体の固相焼結中の組織と強度の変化 | Changes in microstructure and mechanical properties during solid sintering of Al-Cu binary mixed powder compact | 軽金属 | Journal of Japan Institute of Light Metals | 30-Mar-1995 |
bulletin (article) | 大宮, 光裕; 大笹, 憲一; 大参, 達也; 工藤, 昌行 | Al-Ge-Si三元系平衝状態図の計算 | Calculation of Equilibrium Phase Diagram of Al-Ge-Si Ternary System | 北海道大學工學部研究報告 | Bulletin of the Faculty of Engineering, Hokkaido University | 20-Jul-1991 |
article | 大参, 達也; 上田, 誠; 工藤, 昌行; 井口, 学 | Al-Ni-Si系複層遠心鋳造管の複合硬化層形成と耐摩耗性 | Formation and wear resistance of composite - hardened layer in centrifugally cast Al-Ni-Si duplex pipes | 鋳造工学 | Journal of Japan Foundry Engineering Society | 25-Apr-2005 |
bulletin (article) | 大笹, 憲一; 大宮, 光裕; 工藤, 昌行; 大参, 達也 | Al基三元合金の凝固パスの解析 | Analysis of Solidification Path of Aluminum Base Ternary Alloy | 北海道大學工學部研究報告 | Bulletin of the Faculty of Engineering, Hokkaido University | 29-Jan-1993 |
article | 大参, 達也; 中寺, 一也; 工藤, 昌行 | NaおよびPの添加を併用した複合鋳込み法による過共晶Al-Si合金の改良処理 | Modification of hipereutectic Al-Si alloys by the Duplex Casting process with addition of Na and P | 軽金属 | Journal of Japan Institute of Light Metals | 30-Mar-1992 |
article | 大参, 達也; 矢野間, 潤持; 工藤, 昌行 | Ni-Al系金属間化合物のテルミット型燃焼合成における反応生成物の溶融挙動 | Melting Behavior of Reaction Products during Thermite-Type Combustion Synthesis of Ni-Al Intermetallic Compounds | 日本金属学会誌 | Journal of the Japan Institute of Metals | 1-Mar-2001 |
article | 大参, 達也; 山森, 樹; 坂入, 正敏 | Ti-Al系合金マイクロチャンネル内壁のマルチスケールボーラス構造に及ぼす陽極酸化時間の影響 | Effect of anodizing time on multiscale porous structure of Ti–Al alloy microchannel wall | 軽金属 | Journal of Japan Institute of Light Metals | 30-Nov-2017 |
article | 松浦, 清隆; 小柳, 貴幸; 大参, 達也; 工藤, 昌行 | アーク表面合金化によるニオブのアルミナイド被覆 | Aluminide Coating on Niobium by Arc Surface Alloying | 日本金属学会誌 | Journal of the Japan Institute of Metals | Sep-2004 |
article | 大参, 達也; 簔口, 光樹; 工藤, 昌行; 伊藤, 洋一; 松浦, 清隆 | スラリー・溶湯混合法による半凝固過共晶Al-Si合金の見掛けの粘性挙動 | Change in apparent viscosity of stirred slurry during production of semi-solid hypereutectic Al-Si alloy by slurry-melt mixing process | 軽金属 | Journal of Japan Institute of Light Metals | 30-Sep-1994 |
article | 大参, 達也; 簑口, 光樹; 工藤, 昌行; 伊藤, 洋一; 松浦, 清隆 | スラリー・溶湯混合法による半凝固過共晶Al-Si合金の初晶Si粒径の制御 | Control of Primary Silicon Crystal Size of Semi-Solid Hypereutectic Al-Si Alloy by Slurry-Melt Mixing Process | 日本金属学会誌 | Journal of the Japan Institute of Metals | Nov-1994 |
article | 大参, 達也; 室田, 康宏; 桐原, 和彦; 工藤, 昌行 | テルミット型燃焼合成法を利用したNi-Al系金属間化合物の遠心鋳造 | Centrifugal Casting of Ni-Al Intermetallic Compounds Produced by Thermite-Type Combustion Synthesis | 日本金属学会誌 | Journal of the Japan Institute of Metals | May-2001 |
article | 大参, 達也; 簑口, 光樹; 工藤, 昌行; 伊藤, 洋一; 松浦, 清隆; 石井, 邦宜 | 亜共晶Al-Si合金の半凝固スラリーとリンを添加した過共晶Al-Si合金溶湯との混合による微細初晶シリコンの生成 | Formation of Fine Primary Silicon Crystals by Mixing of Semi-solid Slurry of Hypoeutectic Al-Si Alloy and Phosphorus-Added Hypereutectic Al-Si Alloy Melt | 日本金属学会誌 | Journal of the Japan Institute of Metals | Mar-1994 |
bulletin (article) | 大笹, 憲一; 大参, 達也; 高橋, 忠義 | 液相流動と固相変形とを考慮したAl-Si合金鋳塊の凝固収縮負圧の解析 | Analysis of Negative Pressure in Solidifying Al-Si Alloy with the Effects of Fluid Flow and Solid Deformation | 北海道大學工學部研究報告 | Bulletin of the Faculty of Engineering, Hokkaido University | 30-Sep-1988 |
article | 大参, 達也; 桐原, 和彦; 工藤, 昌行 | 遠心燃焼合成法によるNi-Al合金の精密鋳造と異種金属材料への同時接合 | Precision Casting of Ni-Al Alloy and Simultaneous Joining to Dissimilar Metals by Centrifugal Combustion Synthesis | 日本金属学会誌 | Journal of the Japan Institute of Metals | Sep-2000 |
article | 大参, 達也; 桐原, 和彦; 工藤, 昌行 | 遠心燃焼合成法によるNi-Al合金の鋳造とステンレス鋼への同時接合 | Casting of Ni-Al Alloy and Simultaneous Joining to Stainless Steel by Centrifugal Combustion Synthesis | 日本金属学会誌 | Journal of the Japan Institute of Metals | May-2000 |
article | 大参, 達也; 松浦, 清隆; 工藤, 昌行; 伊藤, 洋一 | 過共晶Al–Si合金溶湯と異種合金溶湯との混合過程における過冷却現象と初晶凝固 | Undercooling and primary solidification behavior in mixture of hypereutectic and another Al-Si alloy melts | 軽金属 | Journal of Japan Institute of Light Metals | Jan-1998 |
article | 大参, 達也; 田中, 康博; 工藤, 昌行 | 過共晶Al-Si系合金の複合鋳込み鋳塊における微細初晶粒子の生成起源 | Origin of Fine Primary Crystals in Hypereutectic Al-Si Alloy Ingots Produced by Duplex Casting Process | 日本金属学会誌 | Journal of the Japan Institute of Metals | Jan-1992 |
article | 大参, 達也; 工藤, 昌行; 井口, 学 | 過共晶Al-Si合金の初晶けい素徴細化に及ぼす複合鋳込みと溶湯攪拌の影響 | Influence of duplex casting and agitation on refinement of primary silicon crystals in hypereutectic Al-Si alloy | 鋳造工学 | Journal of Japan Foundry Engineering Society | 25-Aug-2005 |
bulletin (article) | 大参, 達也; 田中, 康博; 工藤, 昌行 | 過共晶Al-Si合金の初晶微細化におよぼす過冷度と冷却速度の影響 | Effects of Undercooling and cooling Rate on Primary Silicon Size of Hypereutectic Al-Si Alloys | 北海道大學工學部研究報告 | Bulletin of the Faculty of Engineering, Hokkaido University | 20-Jul-1991 |