Hokkaido University Collection of Scholarly and Academic Papers >
Graduate School of Engineering / Faculty of Engineering >
Peer-reviewed Journal Articles, etc >
熱間圧延によるAl–Si鋳造材のミクロ組織および機械的性質の変化
Title: | 熱間圧延によるAl–Si鋳造材のミクロ組織および機械的性質の変化 |
Other Titles: | Changes in microstructure and mechanical properties of cast Al–Si alloy due to hot rolling |
Authors: | 外山, 和宏1 Browse this author | 松浦, 清隆2 Browse this author →KAKEN DB | 大野, 宗一3 Browse this author →KAKEN DB | 佐藤, 大樹4 Browse this author | 中山, 昌紀5 Browse this author |
Authors(alt): | Toyama, Kazuhiro1 | Matsuura, Kiyotaka2 | Ohno, Munekazu3 | Sato, Taiki4 | Nakayama, Nasanori5 |
Keywords: | Al-Si cast alloy | hot rolling | tensile test | shrinkage cavity |
Issue Date: | 30-Jan-2010 |
Publisher: | 軽金属学会 |
Journal Title: | 軽金属 |
Journal Title(alt): | Journal of Japan Institute of Light Metals |
Volume: | 60 |
Issue: | 1 |
Start Page: | 7 |
End Page: | 11 |
Publisher DOI: | 10.2464/jilm.60.7 |
Abstract: | Effects of hot rolling on microstructure and mechanical properties of a cast Al–Si alloy have been investigated. The hot rolling was carried out at 330°C with rolling reductions ranging from 0 to 80%. With increase in the rolling reduction, the shrinkage cavity decreases in size and volume fraction, and also the eutectic Si particles decreased in size and distance between the particles. In the hot rolled samples, the Al matrix phase consisted of recrystallized grains of which size is comparable to the distance between the eutectic Si particles. Ultimate tensile strength of hot rolled sample increased nearly 33% compared to the one without hot rolling. Elongation of hot rolled sample was about 4.5 times higher than the one without hot rolling. |
Type: | article |
URI: | http://hdl.handle.net/2115/75326 |
Appears in Collections: | 工学院・工学研究院 (Graduate School of Engineering / Faculty of Engineering) > 雑誌発表論文等 (Peer-reviewed Journal Articles, etc)
|
Submitter: 大野 宗一
|