|
Hokkaido University Collection of Scholarly and Academic Papers >
Graduate School of Engineering / Faculty of Engineering >
Peer-reviewed Journal Articles, etc >
Oxidation performance of spark plasma sintered Inconel 625-NbC metal matrix composites
| Title: | Oxidation performance of spark plasma sintered Inconel 625-NbC metal matrix composites |
| Authors: | Grabos, Adrian Browse this author | | Rutkowski, Pawel Browse this author | | Huebner, Jan Browse this author | | Kozien, Dawid Browse this author | | Zhang, Shenghua Browse this author | | Kuo, Yen-Ling Browse this author | | Kata, Dariusz Browse this author | | Hayashi, Shigenari Browse this author →KAKEN DB |
| Keywords: | Metal matrix composites | | Superalloys | | SEM | | High temperature corrosion | | Oxidation |
| Issue Date: | 15-Aug-2022 |
| Publisher: | Elsevier |
| Journal Title: | Corrosion Science |
| Volume: | 205 |
| Start Page: | 110453 |
| Publisher DOI: | 10.1016/j.corsci.2022.110453 |
| Abstract: | The study aimed to answer the question of previously obtained Inconel 625-NbC metal matrix composites (MMC) applicability in high-temperature and/or oxidative environments, that were proven to possess improved mechanical properties. To achieve that goal, a similar manufacturing process was performed, utilizing spark plasma sintering (SPS) at 1100 degrees C under 45 MPa, and in a medium vacuum (under 10-3 MPa). The total time for each sample equaled 60 min. Four sets of samples were obtained with ceramic reinforcement additions equaling 0, 5, 10, and 20 wt%. Hot rolling at 1100 degrees C with a 10% reduction step was applied to sintered materials in order to fully replicate previous technology. Oxidation tests were performed in furnaces with free flow of air for three total time periods: 24, 49, and 100 h at 800 degrees C. It was revealed that all samples kept their ability to form passive layers by matrix, but those layers were locally breached due to grain growth and thermal stresses of the oxidized reinforcement phase. Two different passive layer formations were observed and discussed: (Cr/Ni)-rich covering composite surface and (Cr/Nb)-rich forming around ceramic reinforcement. Total mass gain during oxidation was kept under 1 mg/cm2 for each sample series, with samples containing 5 wt% of NbC performing similarly to reference material. Hardness loss (up to 15%) was observed in near-surface zones of obtained MMC due to composite oxidation. |
| Type: | article |
| URI: | http://hdl.handle.net/2115/86470 |
| Appears in Collections: | 工学院・工学研究院 (Graduate School of Engineering / Faculty of Engineering) > 雑誌発表論文等 (Peer-reviewed Journal Articles, etc)
|
|
