|
|
Hokkaido University Collection of Scholarly and Academic Papers >
Graduate School of Engineering / Faculty of Engineering >
Peer-reviewed Journal Articles, etc >
Single-phase La(0.8)Sr(0.2)Co(1-x)Mn(x)O(3-delta )electrocatalyst as a triple H+/O2-/e(-) conductor enabling high-performance intermediate-temperature water electrolysis
| Title: | Single-phase La(0.8)Sr(0.2)Co(1-x)Mn(x)O(3-delta )electrocatalyst as a triple H+/O2-/e(-) conductor enabling high-performance intermediate-temperature water electrolysis |
| Authors: | Wang, Ning Browse this author | | Tang, Chunmei Browse this author | | Du, Lei Browse this author | | Liu, Zhao-Qing Browse this author | | Li, Weiyan Browse this author | | Song, Zhongqian Browse this author | | Aoki, Yoshitaka Browse this author →KAKEN DB | | Ye, Siyu Browse this author |
| Keywords: | Electrolyzer | | Intermediate-temperature water | | electrolysis | | Triple conductor | | Hydration reaction | | Fuel cell |
| Issue Date: | Sep-2022 |
| Publisher: | Elsevier |
| Journal Title: | Journal of Materiomics |
| Volume: | 8 |
| Issue: | 5 |
| Start Page: | 1020 |
| End Page: | 1030 |
| Publisher DOI: | 10.1016/j.jmat.2022.02.012 |
| Abstract: | Hydrogen, especially the green hydrogen based on water electrolysis, is of great importance to build a sustainable society due to its high-energy-density, zero-carbon-emission features, and wide-range applications. Today's water electrolysis is usually carried out in either low-temperature (<100 degrees C), e.g., alkaline electrolyzer, or high-temperature (>700 degrees C) applications, e.g., solid oxide electrolyzer. However, the low-temperature devices usually suffer from high applied voltages (usually >1.5 V @0.01 A cm(-2)) and high cost; meanwhile, the high-temperature ones have an unsatisfied lifetime partially due to the incompatibility among components. Reasonably, an intermediate-temperature device, namely, proton ceramic cell (PCC), has been recently proposed. The widely-used air electrode for PCC is based on double O2-/e(-) conductor or composited O2-/e(-) -H+ conductor, limiting the accessible reaction region. Herein, we designed a single-phase La0.8Sr0.2Co1-xMnxO3-delta (LSCM) with triple H+/O2-/e(-) conductivity as the air electrode for PCCs. Specifically, the La0.8Sr0.2Co0.8Mn0.2O3-delta (LSCM8282) incorporates 5.8% proton carriers in molar fraction at 400 degrees C, indicating superior proton conducting ability. Impressively, a high current density of 1580 mA cm(-2) for hydrogen production (water electrolysis) is achieved at 1.3 V and 650 degrees C, surpassing most low- and high-temperature devices reported so far. Meanwhile, such a PCC can also be operated under a reversible fuel cell mode, with a peak power density of 521 mW cm(-2) at 650 degrees C. By correlating the electrochemical performances with the hydrated proton concentration of single-phase triple conducting air electrodes in this work and our previous work, a principle for rational design of high-performance PCCs is proposed. (C) 2022 The Chinese Ceramic Society. Production and hosting by Elsevier B.V. |
| Type: | article |
| URI: | http://hdl.handle.net/2115/87110 |
| Appears in Collections: | 工学院・工学研究院 (Graduate School of Engineering / Faculty of Engineering) > 雑誌発表論文等 (Peer-reviewed Journal Articles, etc)
|
|
